PLACEHOLDER Brown Leather Catcher's Mitt. Material: leather, textile, button. Size: 6 1/2" W. x 9" L. Description: natural colored leather glove for the left hander, lined; adjustable size strap with button on wrist back; lacing around lower edge.

Baseball Catcher Mitt. Material: leather, metal. Size: 11" W. x 11 1/2" L. Description: leather glove - heavy padding with depressed palm area - finger and glove pockets - wrist strap with adjustable buckle - leather lacing around perimeter of glove.

Material: leather, textile. Size: 4 1/2" diameter. Description: grayish leather - stitched seams.

Metal Shoe Clamp Skate. Material: metal, leather. Size: 3 1/4" W. x 11 1/4" L. x 3 1/2" H. Description: (pair) metal blade bolted to an adjustable metal sole, adjusting screw located between toe and heel; toe piece designed to clamp to shoe; leather heel with strap and buckle to secure around ankle.

White Wooden Baby Sled. Material: wood, metal, textile. Size: 17" W. x 63" L. x 28" H. Description: white painted sled; bent wood front; blue corduroy upholstered seat; bent wood runners lined with metal; adjustable handle.

Skis. (a, b) Material: wood, leather, metal. Size: 3 1/4" W. x 64" L. x 1" D. Description: wooden rectangular board with one end bent and tapered upward; 8 1/2" L. leather boot strap and 3/8" W. x 2 3/8" L. leather heel stop at mid-ski; nails hold strap and stop to ski. One ski strap missing. Hand crafted primitive construction.

Material: wood. Size: 7/16" diameter x 1 3/8" L. Description: yellow stained wood. Set of 5 golf tees.

Material: wood. Size: 7/16" diameter x 1 1/4" L. Description: yellow stained wooden peg - set of two golf tees.

Material: wood. Size: 3/8" diameter x 1 1/4" L. Description: tan painted peg - red painted head - set of two golf tees - stamped inside head: . Set of 2 Golf Tees. Size - 1 5/16 " L x 3/8 " diameter at head. Material - wood. Painted beige on shaft & red head. Lettering stamped inside the convex head read "THE REDDY TEE".

Golf Tee. Size - 1 11/16 " L x 7/16 " diameter at head. Material - red plastic.

PLACEHOLDER Material: wood, metal. Size: 17" W. x 32" L. x 31" H. Description: green painted wood - box shaped sleigh - sides taper down towards foot - bent wood runners with metal bottoms curve under sled box into the front box shield board - long curved handles on back connected with a bar handle for pushing.

Metal Ice Skates. Material: metal. Size: 2 1/2" W. x 12 3/8" L. x 2 5/8" H. Description: steel runners with a shoe clamp that is adjustable for length and width; stamped "Hardened and Tempered - ---ffin Skate Co., Boston, Mass., U.S.A"

PLACEHOLDER Ice Skate Case. Size: 14 1/8 " L x 7 " W. Material: coated canvas. Description: black rectangle with a long pocket on each side. Machine-stitched.

Metal Shoe Clamp Skates. Material: metal. Size: 3" W. x 10 3/8" L. x 2 1/8" H. Description: metal runners designed to clamp on to shoes or boots; adjustable length and width by moving a lever on runner; open design heart-shape cut through metal on sole; printed into metal lever: "B&B". Size 9 1/2.

Metal Ice Skate. Material: metal, wood. Size: 2 1/8" W. x 12 5/8" L. x 4 3/8" H. Description: one metal runner curves up at front and is screwed into unfinished wooden sole; two strap holes on each side of sole (straps missing).

Wooden Ice Skate. Material: metal. Size: 1" W. x 9 7/8" L. x 2" H. Description: wooden runner curved upward on front. One skate missing.

Herter's Archers Glove. Material: plastic, paper, textile. Size: 4 1/4" W. x 8 1/2" L. Description: tan leather archery glove; three finger cots; strap designed to encircle wrist with snap closure at front; leather piece and three straps extend over top of hand; black print on glove: "Herter's Qk1e Large"; packaged in plastic bag; white label stapled at top, red print: Herter's Since 1893, with Herter logo crest; white paper sticker on front of plastic: "Herter's Waseca Qkie LG PO $2.57"; whit ... more

Braves Baseball. Material: leather, metal. Size: 13 1/2" W. x 12" L. Description: leather over padding - palm depressed for receiving baseball - finger and thumb pockets - leather laced around perimeter - marked in two places: "Gig".

Braves Baseball. Material: leather, cork, textile. Size: 3" diameter. Description: white horsehide cover over cork center - red seam stitching - labeled: "Official League Ball, Spalding" - autographed: "Bob Gigeay" and "Vern Edmonds".

Waseca Braves Baseball. Material: leather, textile. Size: 3" diameter. Description: white leather cover with red stitched seams, inscribed: "No-hit ball, Fri. July 17, 1953, Waseca vs. Kilkenny, 4-0".

Longwood Tennis Racket. Material: wood and catgut. Size: 9" W. x 26 3/4" L. Color and description: natural color frame and handle with red stringing. Factory stamped on front of handle: "Longwood"; stamped on back: logo of male tennis player standing on a ball. Ball is stamped: "Wright Ditson Championship". Other identifying stamps are: "Trade Mark" and "Reg. U.S. Pat Off, Made in U.S.A." Stamped on one side of handle: "Patented"; stamped on other side of handle: " Wright & Ditson Makers U.S. ... more

Prairie Ridge Golf Course Ball. Material: plastic, rubber. Size: 1 1/4" W. Description: white silicone exterior, rubber interior, dimpled surface; black, green and red imprint on ball surface: "1 Top Flite XL, Regular Trajectory, Prairie Ridge Janesville MN".

Golf course Flag. Material: plastic, textile. Size: 13 3/4" W. x 20" L. Description: white nylon - black appliqued number "3" in upper corner - blue and green stenciled "Prairie Ridge" across lower area - white rigid plastic pole holder along one side.

Prairie Ridge Golf Club Score Card. Material: paper. Size: 6" W. x 12" L. (unfolded). Description: multicolored card stock trifold design. photographs of Prairie Ridge Golf Course, clubhouse, players, water hazard on one side; local Janesville business advertisers, USGA rules and score card on reverse.

Black Leather Ice Skates. Material: leather, metal, textile. Size: 2 1/2" W. 12 1/2 L. x 8 1/2" H. Description: black leather - brown leather trim - front lace-up closure in metal eyelets - black laces (one missing) - steel blade runner.